Long Wrap Skirt Pattern
Make an adorable wrap skirt pattern with ties when you follow along with our how-to video.
We are adding the pattern to your Sewing Patterns.
The pattern was added to your Sewing Patterns.
Give your wardrobe an elegant and beachy vibe with this video tutorial that's perfect for summer. This Long Wrap Skirt Pattern video shows you how to create a flowy wrap skirt using a commercial pattern and fabric with a fantastic drape. If you're new to sewing or have never used a traditional pattern, then you're in luck, because Carolina Moore provides detailed tips on reading your sewing pattern and laying out your pattern pieces. This tutorial for how to make a wrap skirt also features tips and tricks to working with polyester and spandex fabric, finishing your seams, and using interfacing. Get ready to hit the beach in style with this DIY wrap skirt tutorial.
Project TypeMake a Project
Time to CompleteIn an evening
- Wrap Skirt Pattern
- Fabric (Check pattern to see how much you will need. Be sure to measure your body instead of focusing on the off-the-rack size). Find a fabric that drapes nicely. We used a polyester spandex blend.
- Measuring Tape
- Lightweight Interfacing
- Sewing Machine
Open up your pattern and unfold your pattern pieces. Cut out the right pieces, check instructions for which pieces to use.
Lay fabric out with selvages lined up, put the pattern on fabric (right or wrong side) according to the pattern instructions.
Check the long arrow on your pattern to determine what direction your fabric should be going in.
Pin pattern to your fabric and cut out your pieces.
Do a quick stitch around the waistband of all of your pieces to help keep the waistband the right shape for your final product. A curved edge means the fabric will stretch and warp as it is handled. This stitch helps eliminate these issues. Use a longer stitch week if you’d like. Stitch it inside your 5/8 seam allowance. Repeat all 4 of the skirt panels.
Sew the hem on the front of your garment. This will be on both the front pieces. Create hem by ironing, use measuring tape to insure an even hem, fold over once and then twice. Make sure to check your iron heat on a small swatch of your fabric before ironing to make sure that your iron will not melt your fabric.
Press hem for both sides of your pattern and then sew with a straight stitch. Make sure to use a thread that matches your fabric. If your seam is rippled, press again to smooth it out.
Put your pieces together by lining up the correct side seams. You should have notches on both to let you know you are doing it correctly. Pin all the way down your seam with your pins perpendicular to your fabric.
Sew your seams and use a 5/8-inch seam allowance (on your stitch plate). Stitch all the way down, be careful not to stretch your fabric.
Press your seams open. Make sure to finish your edges on this pattern.
If your pattern requires it, cut your interfacing for the waist band and ties before ironing it on with the smooth side is up to press it in place. Check interfacing for exact instructions and times.
Prepare the ties. Consider marking each tie so do not mix the two up. Fold the fabric in half with interface on the outside. Stitch on the short end, going back and forth to secure before sewing to the corner and rotating your fabric. Clip your corners to reduce the bulk.
Turn the tube right side out. Use a tube to pull it out, a safety pin, or your fingers.
Pull your corner seams out carefully with a pin before pressing the tie.
Repeat for the second tie.
Attach your waistband by finding the center back seam. Fold your waistband in half or use your markings to find the center. Pin with right sides together all the way along to both sides. Your waistband will be a little longer than the skirt piece.
Trim and layer your seams. Layering your seams means to lay your seams down so they are not directly on top of one another. This helps reduce bulk in the seam of the final garment. Sew the two pieces together.
Pin on your ties. The ties are different sizes, so make sure you are attaching right to right and left to left.
Stitch your tie to your garment. Make sure to stitch forward and backwards to secure it in place. Reduce the bulk where your tie is attached by trimming excess.
PIn your waistband in place and sew it with the 5/8 inch, starting with a couple stitches forward and backwards to secure all layers.
Press your waistband all the way down.
Finish the bottom hem. This is at a curve, but since your fabric has some stretch so it should be easy to finish.
More Wrap Skirt Patterns
Looking for more wrap skirt patterns or need a pattern to complete the project above? We have plenty of free skirt patterns to pick from. These swishy summer skirts are ideal for casual or fancier events. Check out our collection of 15 Wrap Skirt Patterns for even more ideas.
Free projects, giveaways, exclusive partner offers, and more straight to your inbox!
Your Recently Viewed Projects
Images from other crafters
Our Newest Projects & Articles
- Aladdin's Vest
- How to Sew Canvas
- How to make Lavender Bags
- Small Zipper Pouch
- Organizer Sewing Pattern
- How to Make a Soft Baby Blanket (Video)
- National Sewing Month 2019
- 20 DIY Window Treatments
- 30 1920s Patterns Coco Chanel Would Love
- How to Sew a Drawstring Bag
- 11 Free Vintage Patterns: How to Sew Retro-Inspired Clothing for Ladies
- 11 Sewing Room Ideas: How To Organize Your Room
- 15 Sewing Patterns for Women's Dresses & Other Pretty Project
- 25 Sewing Crafts from Bloggers
- 9 Insanely Awesome Sewing Ideas: How to Sew a Pillow, DIY Home Decor, and More
- Designer Inspired Sewing: 9 Beautiful Designer Inspired Knock Off Patterns
- Fabulous Fabric Flower Tutorials: 7 Ways to Learn How to Make Fabric Flowers
- Sewing for Baby: 11 Small Sewing Projects for Your Little One
- Sewing For Beginners
- Simple Sewing Projects: 16 Easy Sewing Projects for Beginners